Ovonic 1300mAh 4S battery is the best racing battery which provides you high quality and reliable power, it means higher voltage under load, straighter discharge curves and excellent performance.
Stable automatic stacking technology enables single cell capacities of 1300mAh.
Longer Cycle Life, almost double that of standard lipoly technology.
Higher capacity than comparable size packs.
Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
High rate of 80C, Max Burst discharge Rate 150C.
This battery is suitable for Nemesis 240 Mini, Skylark M4-FPV250, Mini Shredder 200, INDY250 PLUS, HOVERSHIP MHQ2(270), ZMR 250, Emax Nighthawk 250, Mini H, QAV250, QAV180/210, Danaus, Vortex 285, Mini H, FLIP FPV FRAME, Emax Nighthawk 250, ZMR 250, HOVERSHIP MHQ2, MOJO 280, drone and FPV etc.
Ovonic 14.8V 1300mAh 4S 80C LiPo RC Battery with XT60 plug.
For the RC battery, only if the voltage and the plug match, then it will fit.
ONLY use a LiPO Balance Charger for charging this battery.
To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using. If damaged DO NOT charge.
Please stop charging immediately when the cell voltage been charged to 4.2v (Normal cell voltage is between 3.7v~4.2v).
If the new battery won't hold a full charge or loss the charge very quickly in short time, please use Balance Charger to charge and recycle several times first.
Failure to follow these warnings may result in fire or personal injury.
|Max burst discharge rate:||150C||Net Weight(±20g):||154g|
|Dimensions(L*W*H):||69 x 31 x 26mm||Wire Gauge:||AWG12#|
|Discharge Wire Length :||65mm||Charge(Balance) Plug:||JST-XH|
|Balance Wire Length :||45mm||Discharge Plug:||XT-60|
LiPo batteries offer a wide array of benefits. But each user must decide if the benefits outweigh the drawbacks.
Cell count(4s)-As you can see this is a "4S" battery pack - it means that there are 4 cells in Series. A LiPo cell has a nominal voltage of 3.7V. So a two-cell (2S) pack is 7.4V, a three-cell (3S) pack is 11.1V and four cell (4s) is 14.8V.
Discharge rate/”C” Rating (80C)-The C Rating is simply a measure of how fast the battery can be discharged safely and without harming the battery.
-You can charge in a metal box which would be able to contain flames in case of a fire.
-Charged within a temperature of 32F to 120F. Charging batteries outside this range may cause extreme heat, leakage and cell damage.
-Always charge your batteries on a non flammable surface like steel, cement, stone, glass, etc.
-Do not charge your Lithium Polymer batteries more than 1C.
-Do not charge batteries near flammable products.
-Do not charge the batteries unattended.
-Store in temperature-controlled locations–between 40F to 80F and not in direct sunlight.
-Store the lipos in a container with a bag of sand on top. If something were to happen, the flames would rip a hole in the bag, the sand would fall on the battery and extinguish the flames.
-Lipo batteries should be store in ammo boxes or non flammable container.
-Ensure the number of cells and battery type are set correctly on your charger to match the cell count in your battery.
Ovonic 1550mAh 4S 100C lipo battery pack with XT60 plug
Ovonic 14.8V 1550mAh 4S 80C LiPo Battery Pack with XT60 Plug for Vorte...
Ovonic 7.4V 5000mAh 50C 2S LiPo Battery Pack HardCase with Dean-Style ...
Ovonic 14.8V 1300mAh 4S 50C LiPo Battery Pack with XT60 Plug for Nemes...
Ovonic 11.1V 1300mAh 50C 3S LiPo Battery Pack with XT60 Plug for RC Ca...